Extron electronic VTG 150 user manual Introduction, VTG 200 RS-232 Control and Software Chapter

VTG 200 RS-232 Control and Software	Chapter 5
VTG 200 RS-232 Control and Connection to Computer	......... 5-1
Host/VTG 200 Communications	5-2
Using the Command/Response Table	5-2
Command/Response Table	5-3
Definitions and Abbreviations	5-3
Error Code Descriptions	5-3
VTG 200 Control Program	5-5
Installing the Software	5-5
Using the Software	5-5

Reference Material	Appendix A
VTG Software Updates	A-1
Part Numbers	A-1
Adapters	A-1
Pre-cut BNC Cables	A-1
VGA Male-Female Cables	A-1
Mac/Quadra Male-Female Cables	A-2
Male-to-Female Cables (Sun/SGI)	A-2
VGA 15-pin HD Male to 15-pin HD Male Cables	A-2
Mac/Quadra 15-pin Male to 15-pin Male Cables	A-2
13W3 Male-to-Male Cables (Sun/SGI)	A-2

All trademarks mentioned in this manual are the properties of their respective owners.

68-194-01 Rev. C

Printed in the USA

04 02

Legend of Icons

___ Important information – for example, an action or a step that must be done before proceeding.

___ A Warning – possible damage could occur.

_ A Note, a Hint, or a Tip that may be helpful.

__ Possible Electrostatic Discharge (ESD) damage could result from touching electronic components.

__ Additional information may be referenced in another section, or in another document.

Extron VTG 150 & VTG 200

User’s Manual

1Chapter One

Introduction

Introduction

VTG 150 Features

VTG 200 Features

Specifications

Page ii