Fagor America VFA-78 S manual Operating, Hotplate blocking function, Unblocking, Double hotplate

OPERATING

Hotplate blocking function

Blocking of the hotplates prevents accidental changes while they are operating. The initial selections are maintained and the indicators remain active. The hotplates should be blocked to prevent children from operating them or to prevent the effects of accidental contact with cookware or utensils.

Press the blocking sensor until its pilot light comes on.

Unblocking

Touch the blocking sensor until its indicator pilot light switches off.

Double hotplate

The cooktops sources that have double heat source when touching the corresponding sensors to said heat source only work with their small circuit . To operate the outer part, touch the double hotplate sensor until its indicator pilot light comes on, switch off by touching the sensor until the pilot light switches off.

Focus hotplate

The cooktops, which have the source of the heat source when acting over the corresponding sensors of each heat source, only work with their circular circuit. To

switch on the outer part as well, touch the source hotplate	sensor 0 until its control
point switches on.
To switch off the focus hotplate, touch the focus hotplate	sensor 0 until the control
point switches off.

Multi-ring Hotplate

The hobs, which have a multi-ring heat source, on touching the corresponding sensors to said heat source, only work with little resistance. If you wish the center ring to come

on as well, touch the double ring sensor so that the sensor’s control point lights up. To use the ring to heat a multi-ring pan, touch the sensor .

To switch off the two functions just touch the corresponding sensors again and .

12