Fagor America VFA-70 S, VFA-78 S manual Installation, Place the hob alongside the cavity in the

INSTALLATION

3	Place the hob alongside the cavity in the
	worktop and connect the power cable to

the electrical socket.

IMPORTANT: Carry out connection with the power disconnected. There must be a good grounding connection and a switch must be provided in an accessible place to isolate all phases, with at least 1/8 inch clearance between contacts.

The manufacturer will not accept responsibility for installations carried out other than as directed here.

It is equipped with a power input cable for high temperatures.

If a new power input cable is required, installation should be performed by a technician certified by the manufacturer.

If the power feed wire is damaged, it must be replaced by the manufacturer, by the after-sales service or by authorized personnel for safety reasons.

4Next insert the hob in the worktop cavity, pressing down firmly to ensure a good seal.

5Fix the 4 clamps underneath the hob to the 4 corners of the cavity.

(Clamps, brackets and nuts are supplied in accessory bag).

NOTE: This equipment complies with standard 82/499/CE on radio interferences.

19