FIC M295 / M296 Disassembly Instruction
2.To remove the palm rest cover, you need to remove five screws on the under side as indicated on the figure below.
Five Screws
Bottom Case
Palm Rest Cover Screws underneath the under side
3.Turn the machine upward. Slowly lift the palm rest cover, and you will find two cables connected from the glide pad and audio DJ panel to
Glide Pad
Module
Two
Screws
Glide Pad Disassembly
4.Underneath the palm rest cover, you will see the glide pad module assembly. Remove the two screws on the glide pad module. When the glide pad board is removed, you can remove the
P | FIC M295 / M296 Disassembly Instruction |