EmbedDed Audio Device – [Enabled] or [Disabled] SiS Embeded Audio (
SiS 7018 AC97 Audio )
Summary Screen – Select the display of configuration on Boot.
I/O Device Configuration – Lets you configure input/output device such
as Serial Port, Parallel Port, and Floppy disk controller.
PhoenixBIOS Setup Utility
Advanced
I/O Device Configuration Item Specific Help
C
onfigure serial port
A using options:
Serial port A: [Auto]
Serial port B: [Enabled] [Disabled]
Mode: [Bi-directional] No configuration
Base I/O address/IRQ [2F8]
Parallel port: [Enabled] [Enabled]
Mode: [Bi-directional] User configuration
[Auto]
BIOS or OS chooses
configuration
(OS Controlled)
Displayed when
Controlled by OS
F1 Help K Select Item -/+ Change Values F9 Setup Defaults
Esc Exit st Select Menu Enter Select Sub-Menu F10 Save and Exit
Figure 1-15 I/O Device Configuration Sub-Menu
Serial port A [Disabled] / [Enabled]
/ [Auto] Configure serial port A using options:
Disabled - No configuration,
Enabled - User configuration,
Auto - BIOS or OS configuration.
(OS Controlled) – Displayed when
controlled by OS
Serial port B [Disabled] /
[Enabled] / [Auto] Configure seria l port A using options:
Disabled - No configuration,
Enabled - User configuration,
Auto - BIOS or OS configuration.
(OS Controlled) – Displayed when
controlled by OS
Mode: [IrDA] [FIR] Enabled th e IrDA transmission
Base I/O address/IRQ [3F8] / [2F8] / [3E8] /
[2E8] Set the base I/O address and IRQ for
serial port B.