FIC M296, M295 service manual Removing the CD-ROM Drive, Remove CD-ROM Drive

FIC M295 / M296 Disassembly Instruction

Screws of

Heat Sink Plate

Remove cooling fan module by slightly lifting it up

Remove the Cooling Fan

4.Release four screws as shown in the picture above and then remove cooling fan module by slightly lifting it up. Be careful about two fan power cables connected to DC-DC board and main board.

7.Removing the CD-ROM Drive

The procedures for removing and replacing the CD-ROM drive is as follows:

1.Before removing the CD-ROM drive, you need to disassemble keyboard first.

2.To remove the CD-ROM drive, just remove one screw securing the CD-ROM bracket and push out the drive from the connector.

3.Slowly slide the CD-ROM drive out of the base unit.

Screws

Push & Slide

This Way

Remove CD-ROM Drive

FIC M295 / M296 Disassembly Instruction P - 7