Outline of the M295 / M296
1.5.3 Using the Security Menu The Security menu allows you to set the system password as well as disk-protection security.
PhoenixBIOS Setup Utility
Main Advanced Security Boot Exit
Item Specific Help
Supervisor Password Is:
C
lear
User Password Is: Clear Supervisor Password
controls access to the
Set Supervisor Password [Enter] setup utility.
Set User Password [Enter]
Diskette access: [Supervisor]
Fixed disk boot sector: [Normal]
Password on boot: [Disabled]
F1 Help K Select Item -/+ Change Values F9 Setup Defaults
Esc Exit st Select Menu Enter Select Sub-Menu F10 Save and Exit
Figure 1-16 BIOS Setup Security Menu
Supervisor Password Is: Clear / Set While the Supervisor Password had
been enabled, the item will show Set. If
disabled. The item will show Clear.
User Password Is: Clear / Set While the User Password had been
enabled, the item will show Set. If
disabled. The item will show Clear.
Set Supervisor Password Press [Enter] Supervisor Password controls access to
the setup utility.
Set User Password Press [Enter] User Password controls access to the
system.
Diskette access [User] / [Supervisor] Control access to diskette drives.
Fixed disk boot sector [Normal] / [Write
protect] Write protects boot sector on hard disk,
to protect against viruses.
Password on boot [Disabled] / [Enabled] Enab led password entry on boot
Supervisor Password Is: Clear / Set –While the Supervisor Password had
been enabled, the item will show Set. If disabled. The item will show Clear.
User Password Is: -- Clear / Set – While the User Password had been
enabled, the item will show Set. If disabled. The item will show Clear.
FIC M295 / M296 Service Manual 1-27