Software Functional Overview

The granularity of ΔP is determined by the CPU duty width of the system. A detailed explanation of this thermal feedback equation is beyond the scope of this specification.

3.6.6Critical Shutdown

When the heat reaches the temperature indicated by _CRT, the OS must immediately shutdown the system. The system must disable the power either after the temperature reaches some hardware-determined level above _CRT or after a predetermined time has passed. Before disabling power, platform designers should incorporate some time that allows the OS to run its critical shutdown operation. There is no requirement for a minimum shutdown operation window that commences immediately after the temperature reaches _CRT. This is because

Heat might rise rapidly in some systems and slower on others, depending on casing design and environmental factors.

Shutdown can take several minutes on a server and only a few short seconds on a hand-held device.

Because of this indistinct discrepancy and the fact that a critical heat situation is a remarkably rare occurrence, ACPI does not specify a target window for a safe shutdown. It is entirely up to the OEM to build in a safe buffer that it sees fit for the target platform.

3.6.7Other Implementation of Thermal Controllable

Devices

The ACPI thermal event model is flexible enough to accommodate control of almost any system device capable of controlling heat. For example, if a mobile PC requires the battery charger to reduce the charging rate in order to reduce heat it can be seamlessly implemented as an ACPI cooling device. Associating the charger as an active cooling device and reporting to the OS target temperatures that will enable or disable the power resource to the device do this. Figure as following illustrates the implementation. Because the example does not create noise, this will be an implementation of silence mode.

90 _CRT

60

55 _AC0 Fan on/off

50 _PSV Throttle CPU

45 _AC1 Reduce charge

40rate

35

30

25

20

15

10

5

FIC M295 / M296 Service Manual

3-31

Page 81
Image 81
FIC M296, M295 service manual Critical Shutdown, Other Implementation of Thermal Controllable Devices

M296, M295 specifications

The FIC M295 and M296 are modern military vehicles designed for versatility, durability, and efficiency in various operational environments. Both models have gained attention for their advanced features and technological integrations, making them suitable for a range of missions, including logistics, reconnaissance, and troop transport.

One of the standout features of the FIC M295 and M296 is their modular design. This allows for easy configuration based on specific mission requirements. Whether deployed in urban settings or rugged terrains, these vehicles can be outfitted with different payloads and weaponry, enhancing their adaptability and usability. The modularity extends to interior configurations, offering flexibility in troop transport or cargo capacity.

The M295 boasts a robust powertrain, equipped with a high-torque engine that provides excellent off-road capability. Coupled with advanced suspension systems, the vehicle can traverse difficult landscapes while maintaining stability and comfort for its occupants. The M296, on the other hand, offers a slightly different engine configuration, focusing on fuel efficiency without compromising power. Both models are engineered to operate in extreme temperatures and harsh conditions, ensuring reliability in the field.

Another key characteristic is the advanced communication and navigation systems integrated into both vehicles. They come equipped with state-of-the-art GPS and real-time data transmission capabilities, allowing for seamless coordination with commanding units. Furthermore, enhanced battlefield awareness features, such as advanced sensor packages, provide operators with critical information about their surroundings, improving situational awareness and decision-making.

Protection is a fundamental aspect of the FIC M295 and M296. Both models include reinforced armor plating designed to withstand various ballistic threats. Additionally, they incorporate an advanced heat management system to minimize vulnerability to thermal detection by enemy forces. The vehicles also offer options for further armoring and countermeasure systems to enhance safety during operations.

The ergonomics of the cockpit and crew compartment have been meticulously designed to enhance operator comfort and efficiency. Controls are intuitive, and ample space is provided for gear and equipment, making the M295 and M296 not only practical but user-friendly.

In conclusion, the FIC M295 and M296 represent a significant advancement in military vehicle technology. Their combination of modularity, advanced propulsion systems, superior communication capabilities, and robust protection measures makes them an excellent choice for modern warfare scenarios. These vehicles embody the balance of strength, adaptability, and cutting-edge technology that contemporary military operations demand.