FieldServer NCA2-NFS2-3030 Client Side Connection Descriptions, Client Side Node Descriptors

FS-8700-130 Notifier NCA2/NFS-3030 Manual Page 9 of 22

4.3Client Side Connection Descriptions

Section Title

Connections

Column	Function	Legal Values
Title
Port	Specify which port the device is connected to the	P1-P82
	FieldServer
Protocol	Specify protocol used	nfs2-nca; nca2; nfs2-3030
		CRT Port
		4800; 9600; 19200; 38400; 57600; (Vendor
Baud*	Specify baud rate	limitation)
		Printer Port
		9600 (Vendor limitation)
Parity*	Specify parity	None (Vendor limitation)
Data_Bits*	Specify data bits	8 (Vendor limitation)
Stop_Bits*	Specify stop bits	1 (Vendor limitation)

Example
//	Client Side Connections
Connections
Port		,Protocol	,Baud	,Stop_Bits	,Parity
P8		,nfs2-nca	,9600	,1	,None

4.4Client Side Node Descriptors

Section Title

Nodes

Column Title	Function	Legal Values
Node_Name	Provide name for Node	Up to 32 alphanumeric characters
Node_ID	Station address of any physical Node on	1-240. Set unique Id for standalone Notifer-
	network	3030 Panel
Protocol	Specify protocol used	nfs2-nca or nca2 ; nfs2-3030
Port	Specify which port the device is connected	P1-P8
	to the FieldServer

Example
//	Client Side Nodes
Nodes
Node_Name		,Node_ID	,Protocol	,Port
Panel_1		,2	,nfs2-nca	,P8

2Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com

Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: (888) 509-1970 email: support@fieldserver.com