McQuay Micro Tech Open Protocol Driver Manual | Page 28 of 35 |
5.3.6.Driver Related Map Descriptor Parameters
| The address in the McQuay device that contains the data of | Normally this |
Address* | field is set to | |
| interest. | 1 or omitted. |
|
| |
| This parameter is used with direct addressing. When |
|
| reading, up to 4 consecutive address locations in the |
|
Bytes_Per_Field* | McQuay device can be combined and stored in a single | 1,2,3,4 |
| Data Array element. When writing, one value from the |
|
| Data Array may be sent to up to 4 consecutive address |
|
| locations in the McQuay device. |
|
Refer to examples on the following pages.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldServer.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldServer.com
