Care and cleaning - oven
Removing and replacing the oven lamp
Always turn the oven off at the wall before touching an oven lamp. To clean the oven more easily, pull off the glass cover. If you need to replace the light, simply unscrew it.
Removing and replacing the shelf supports
25
1Push the shelf slides in position 7 back into the oven.
2To remove the shelf supports gently push the retaining wire from underneath the stud then swing the lowest edge of the shelf support up and out towards the centre of the oven. The prongs at the top will slide out.
3To replace the shelf support, hold them horizontally and locate the prongs into the small slots at the top of oven cavity.
4Lower the shelf support and gently place the retaining wire underneath the stud.
Important!
To avoid chipping the enamel – do not lower the shelf supports until the prongs are fully inserted into the small slots at the top of the oven.
Cleaning the shelf slides
Important!
Do not wash the shelf slides in the dishwasher. Do not immerse them in soapy water, or use oven cleaner on them. Removing the ‘white’ lubricating grease will reduce the life of the shelf slides and prevent them from running smoothly.
Wipe the shelf slides with a damp cloth and a mild detergent only. Do not wipe off or wash away the ‘white’ lubricating grease (you can see this when the slides are extended).
Note: shelf slides are not supplied with every model.
Caring for the self-cleaning liners
Any grease and dirt coming into contact with the liner is absorbed by the enamel and is broken down with the help of the oxidising catalysts at normal cooking temperatures.
As cleaning is improved by using a high temperature, it may be necessary to occasionally run the empty oven on FAN GRILL
at 200 °C for 1 to 11/2 hours.
Note:
