Fisher & Paykel BI453, BI603 manual Clocks and timers, Electronic clock with minute timer model C

Clocks and timers

Electronic clock with minute timer model (C)

7

Setting the electronic clock

To set the clock, press and hold the – + buttons together briefly (0.00 will stop flashing). You have six seconds to start setting the clock. Press the – or + button until the correct time is displayed. If you make a mistake, press the

– + buttons together and correct the time.

To adjust the time for daylight savings you can reset the hours only. Press and hold the – + buttons together until the hour digits begin flashing, release the – + buttons and re-press either the – or + button until the correct time is displayed.

Fig.4 Electronic clock with minute timer

Setting the minute timer

You can use the timer at any time, even when the oven is not in use. The timer does not turn the oven off and has a maximum setting of 10 hours.

To set the timer, press the – or + button briefly, then the – or + button to set the time you want.

The symbol and time set are displayed. The minute timer displays the countdown in minutes and seconds, or hours and minutes.

To check the time of day during the running of the minute timer, briefly press the – + buttons together.

To cancel the timer, reset the time to 0.00 by pressing the – button.

When the time is up, the timer will beep. Press the – or + button to turn the timer off.

Adjusting the volume of the timer

You can choose between three levels of volume for the timer beeps.

To adjust the volume:

1Check the clock is set and the timer is not running.

2 Press and hold the – button. The timer will beep.

3 Release the – button and re-press to hear the next level of volume. The last level selected is stored.

Note: if the power to the oven is cut, then the ‘beep’ volume will reset to the loudest level.