Fisher & Paykel CG244 Installation instructions, Fastening the installation brackets Figs, Us Ca

US CA

14

Installation instructions

Fastening the installation brackets (Figs. 3-4)

Each cooktop is provided with an installation kit including brackets (“A”) and screws (“B”) for fastening the cooktop to countertops from 51⁄64” (20 mm) to 1 37⁄64” (40 mm) thick.

Turn the cooktop upside down, place it on a soft surface and fasten the brackets “A” to the appropriate holes, without tightening the screws “B” for the moment (see Fig. 3 or 4).

	A	B	A
B
			A	A
				B
		B

	B	A
B		B	A
A
		B
		A

Fig. 3 Location of installation brackets-CG122 models Fig. 4 Location of installation brackets-CG244 models

Fastening the cooktop to the counter (Figs. 5-6)

1Spread the sealing material “C” out along the edge of the cutout, making sure that the junctions overlap at the corners.

2Insert the cooktop into the cutout and position it correctly.

3Adjust the position of the brackets “A” and tighten screws “B” to secure the cooktop firmly in position. See Fig. 5 or 6.

4Using a sharp cutter or trimmer knife, trim the excess sealing material around the edge of the cooktop. Take care not to damage the countertop.

	C
B	A	137⁄64”(40 mm) max.
	51⁄64”(20mm)min.

C
B	137⁄64”(40 mm) max.
A
51⁄64”(20mm)min.

Fig. 5 Fastening the cooktop to the counter-CG122 models Fig. 6 Fastening the cooktop to the counter-CG244 models