Fisher & Paykel CG122, CG244 Installation instructions, Gas rate summary, Adjustment screw

Installation instructions

19

US CA

3Adjust the minimum burner setting:

When changing from one gas type to another, the minimum valve output must also be correct, considering that in this position the flame must be about 5⁄32” (4 mm) long and must remain lit even when the knob is turned quickly from the maximum to the minimum position.

The adjustment is performed with the burner lit, as follows:

Turn the knob to the minimum position. Remove the knob.

Turn the adjustment screw to the correct setting with a screwdriver (Fig.17).

Adjustment screw

Fig. 17 Adjusting the minimum burner setting

For LP/Propane gas, tighten the adjustment screw completely.

4Re-test for leaks:

Repeat the steps under ‘Leak-testing the cooktop’.

5Fill in/affix the gas conversion labels:

After completing the gas conversion, fill in the gas conversion labels (supplied with the conversion kit).

Affix the adhesive/polyester label near the model/serial rating plate on the underside of the basepan.

Affix the paper label into the appropriate frame at the front of this manual, under the duplicate data (model/serial/rating) plate.

Gas rate summary

CG122 models		Nominal	Reduced	LP/PROPANE		NATURAL GAS
		power	power	11” W.C.P.		4” W.C.P.
Burners		BTU/hr	BTU/hr	injector	By-pass	injector	By-pass
				[1/100 mm]	[1/100 mm]	[1/100 mm]	[1/100 mm]
Semi-rapid	6000		1500	72	34	118	adjustable
Rapid	10000		2000	94	44	155	adjustable
CG244 models		Nominal	Reduced	LP/PROPANE		NATURAL GAS
		power	power	11” W.C.P.		4” W.C.P.
Burners		BTU/hr	BTU/hr	injector	By-pass	injector	By-pass
				[1/100 mm]	[1/100 mm]	[1/100 mm]	[1/100 mm]
Auxiliary		3500	1000	55	27	90	adjustable
Semi-rapid		6000	1500	72	34	118	adjustable
Triple-ring wok		11500	5200	100	65	165	adjustable