Installation instructions
Parts checklist
Gas cooktop base unit Literature pack (includes LP kit)
Elbow & blue washer (taped to power supply cable) Regulator (in polystyrene)
Burner heads and caps (check polystyrene carefully before discarding) 3 x burner grates (1 x center, 2 x outer)
Accessories pack (GC365D only)
Tools needed
Phillips No. 2 screwdriver
Plumbing fittings as required
Woodworking tools as required
Oil based paint (for sealing cutout)
For GC365C LP conversion
Ø7⁄64 “ x 1¾” (Ø2.5 x 45 mm) flat screwdriver 9⁄32” (7 mm) box spanner
For GC365D LP conversion
Ø7⁄64 “ x 1¾” (Ø2.5 x 45 mm) flat screwdriver Phillips No. 1 screwdriver
9⁄32” (7 mm) box spanner 13⁄32” (10 mm) ring spanner
9US CA (EN)
