Fisher & Paykel CG365C Installation instructions, Clearance and cabinetry dimensions inches mm

Installation instructions

11US CA (EN)

G

F

C

H

D

A

I B

E

J

Clearance and cabinetry dimensions (inches (mm))

Aminimum clearance from left edge of product to nearest vertical surface

Bminimum clearance from right edge of product to nearest vertical surface

minimum clearance from rear edge of product to:

Cnearest combustible surface nearest non-combustible surface*

Dminimum clearance from front edge of counter to front edge of product

E	minimum clearance from cooking surface to combustible surface centered
	above the cooking surface

Fmaximum overall depth of overhead cabinetry

G	minimum distance between overhead cabinets installed to either side of
	product
H	minimum vertical distance between counter and cabinet extending above
	the counter

minimum clearance below top of countertop to:

Inearest combustible surface

F&P oven or nearest non-combustible surface

maximum distance from the center of the product to the nearest

Jgrounded power outlet. The power supply cable must not touch any hot metal surfaces.

	CG365D		CG365C
1	½” (38)	1	½” (38)
	1 ” (25)		1 ” (25)
1	¼” (32)	1	¼” (32)
less than1	¼” (32)	less than1	¼” (32)
1	¼” (32)	1	¼” (32)
30 ” (762)		30 ” (762)
13 ” (330)		13 ” (330)
36 ” (915)		36 ” (915)
18 ” (457)		18 ” (457)
3 5⁄16” (84)		3 5⁄16” (84)
3 5⁄16” (84)		3 5⁄16” (84)
30 ” (762)		30 ” (762)

*Recommended non-combustible materials are: ¼” (6 mm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015” (0.4 mm) stainless steel, 0.024” (0.6 mm) aluminum or 0.020” (0.5 mm) copper.