7a CAVITY PREPARATION
BENCHTOP
Moisture 10 mm protection
tape must be applied.
These marks indicate formed bracket screw locations, if securing by drawer removal.
Important!
The power outlet must be located in a cabinet adjacent to the dishwasher cavity.
10
Water Connection
Recommended COLD (Maximum 60°C).
¾ “ BSP (GB20) to suit flat washer.
Water Pressure
Important!
Adjacent cabinetry must not extend above cavity base
Services can be located either side of the dishwasher.
min. ø 60 mm
Water softener models
Max. 1 MPa (145 psi)
Min. 0.1 MPa (14.5 psi)
Models without water softener
Max. 1 MPa (145 psi)
Min. 0.03 MPa (4.3 psi)
min. 200 mm