INTEGRATED MODELS WITH REMOTE (NZ AU) ONLY - INSTALLING THE FRONT PANEL | 19 |
20a ADJUST PANEL HEIGHT TO ALIGN THE CABINETRY GAPS
With the front panel fitted, insert an appropriately sized Philips screwdriver into the hole above the door pin and rotate the panel up or down to align the gaps in your cabinetry.
| Repeat on the other side if necessary. |
+ or - 2 mm | The panel has a maximum travel of 2 mm up or |
| down. |
Important!
Ensure that you maintain a minimum of 2 mm ventilation gap below the panel.