3a PARTS SUPPLIED - ALL MODELS | 4 |
|
Drain hose | Drain hose | Wire clip (1) | Side mounting | Clamp (1) | Phillips | 38 mm |
support (1) | joiner (1) | (for securing | bracket kit | (for securing | 16 mm | bottom |
|
| Drain hose joiner) | (A and B) (2) | Drain hose joiner) | screws (7) | fixing screws |
|
|
| OPTIONAL |
|
| & metal |
|
|
|
|
|
| washers (2) |
Cavity bracket kit (1)
supplied with Tall height Designer and Integrated models only
If the Drain hose supplied is not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hose by 3.6m. The kit is available from the nearest Fisher & Paykel Authorised Service Centre or through our local website listed at the end of this document.
Rubber | Moisture |
washer for | protection |
inlet hose (1) | tape (1) |
(comes already | (to prevent |
fitted) | moisture damage) |
