23 THERE ARE TWO DIFFERENT PLUMBING AND DRAINAGE OPTIONS. CHOOSE WHICH IS MORE SUITABLE. | 22 |
Dishwasher and Standpipe Ø 38 mm
Dishwasher using sink trap with drain hose joiner
If space is limited for fixing, push hose through drain hose support
to required height
max. 120 mm
38 mm
2
Supplied drain hose joiner 19 mm waste tee
3
If space is limited for fixing, push hose through drain hose support
to required height
750-882.5 mm
2
1
mm
5 . 882
- 750
see 24*
min. R 200 mm
1
mm
5 . 882
- 750
HIGHLOOP min. 150 mm
see 24*
min. R 200 mm
Important!
Do not connect the drain hose to a waste disposal unit, as this type of connection may lead to a blockage in the drain hose.
Ensure drain hose is routed straight to joiner. Remove excess drain hose material if necessary.
Do not shorten the inlet hose.
24CONNECT INLET HOSE TO COLD WATER
Tighten coupling with spanner. |
Ensure the |
|
|
|
|
|
|
|
| |||
supplied |
|
|
| ||
rubber |
|
|
| ||
washer is | 180o |
| No leaks! | ||
fitted inside |
| ||||
the coupling. |
| 24 | |||
31 |
|
25PLUG PRODUCT IN
5