16
ALTERNATIVE METHOD (b) - SECURE BY DRAWER REMOVAL
10b INTEGRATED MODELS WITH REMOTE (NZ AU) ONLY -
ATTACH VENTING HOSE
Check that the fitted elbow is rotated left or right (depending on the direction of the routing), then ensure the venting hose is securely attached to it.
Fitted Elbow
11b PULL THROUGH HOSES & MOVE INTO THE CAVITY
Vent Hose (Integrated models with remote (NZAU) only)
vent either through same cabinet or adjacent cabinet as per step 7b or 7c
As you push product in, pull through hoses and cord, ensuring they don’t get kinked or twisted.
Important!
If product cannot be pushed in far enough, pull out again and rearrange hoses and cord. Do not use excessive force, as doing so may squash the hoses and lead to incorrect operation.
