16
ALTERNATIVE METHOD (b) - SECURE BY DRAWER REMOVAL
9b INTEGRATED MODELS WITH REMOTE (NZ AU) ONLY -
ATTACH VENTING HOSE
Check that the fitted elbow is rotated left or right (depending on the direction of the routing), then ensure the venting hose is securely attached to it.
10b PULL THROUGH HOSES & MOVE INTO THE CAVITY
Vent Hose (Integrated models with remote (NZAU) only)
Fitted Elbow
vent either through same cabinet or adjacent cabinet as per step 7b or 7c
As you push product in, pull through hoses and cord, ensuring they don’t get kinked or twisted.
Important! | Important! |
Ensure correct chassis position. In order | If product cannot be pushed in far enough, pull |
for product to function, cabinetry must | out again and rearrange hoses and cord. Do not |
not block the drawer front from closing | use excessive force, as doing so may squash the |
hard against the chassis. | hoses and lead to incorrect operation. |
