|
| INTEGRATED MODELS WITH BADGE (GB IE) ONLY - INSTALLING THE FRONT PANEL & BADGE CONTROLS | 21 | |
|
| |||
|
| |||
19b REATTACH BADGE & EARTH THE PANEL | 20b ATTACH PANEL TO PRODUCT |
| ||
2 | 2 |
1 | Push the panel |
in then up to | |
| locate. |
WARNING! | 1 |
| |
WARNING! | 2 |
Electrical Shock Hazard | |
Electrical Shock Hazard | |
Conne the integrated b dge earth wire to one of | |
the two tabs provided on the panel bracket. |
|
To earth the panel bracket, connect the |
|
Connect the integrated badge earth wire to |
|
earth wire from the product to the other tab. |
|
one of the two tabs provided on the panel |
|
Failure to follow these warnings may result in |
|
electricalbracket.shock,Toinjuryearthorthefire. panel bracket, connect |
|
the earth wire from the product to the other |
|
tab. Any custom metal component (e.g. han- |
|
dle) that extends past the rubber seal must |
|
be earthed too. |
|
Failure to follow these warnings may result in electrical shock, injury or fire.
Important!
Ensure the rubber seal between the drawer and panel is kept in place.
