SU4/UF2
Rec. List SUPER
Entering the Program Type
To have the program type included in the Rec. List super menu, you must enter the program type before proceeding to step 1 of “RECORDING” on page 25.
œThe clock must be set before the program type can be selected.
1Press the TYPE button on the remote control.
The Type input menu will be displayed on screen.
@@Type†Auto
NOTES:
œTo enter the selected program type, press the SET button within 10 seconds after selecting a program type.
œProgram types set manually have priority over automatic settings.
œAfter pressing the POWER button (to switch off the power), or ejecting the cassette, the selected type will be cancelled if no recording have been made.
2Press the TYPE button repeatedly until the desired program type is displayed.
Each time the TYPE button is pressed, a different type,
Auto: If the recorded program transmission carries title information, it will automatically be entered. Then, when using the Rec. List super function, the title will be displayed (up to 15 characters).
Other settings: When using the Rec. List super function, the setting entered here will be displayed as the program type.
NOTE: To cancel, press the CLEAR button.
3Press the SET button to enter the settings.
The entered type code (e.g. Movie → MO) will be displayed for about 3 seconds on the indicator panel.
BASIC OPERATION
27
