Fisher FVH-E439 operating instructions Alternative Cable Tv Connections

SU4/UF2 (FVH-E439 GB) Tue. Feb. 09/1999

ALTERNATIVE CABLE TV CONNECTIONS

Your VCR can receive all unscrambled cable channels without the use of an external converter. If you wish to view and record scrambled cable channels, you must connect a converter/decoder as described below.

Your local cable TV company will advise you of the channels available in your area.

We recommend that you consult your cable TV company to make sure that the cable is properly connected.

When the TV does not have a built-in cable converter

Connect the cable TV converter between the VCR and the TV so that you can watch a cable TV program while recording another program.

NOTE: Set the TV channel to the cable converter output channel (CH02 ~ 07).

CATV	VCR			Cable	TV
	(Back		panel)	converter	(Back	panel)
75 ohm
coaxial			VHF/UHF		VHF/UHF
cable			FROM ANT.		ANTENNA
				IN	OUT	IN
			IN
	RF		TO TV
	CHANNEL
	3	4	OUT
	AC IN
				(supplied)	(not supplied)

When you have both cable and pay TV (scrambled channels)

NOTES:

œWith this method the TV and VCR receive the same channel. Recording one program while watching another is not possible.

œWith this connection, the VCR must be set to the cable converter/decoder output channel. (See next page.)

Cable	VCR			TV
converter/	(Back		panel)	(Back	panel)
Decoder			VHF/UHF	VHF/UHF
			FROM ANT.	ANTENNA
					IN
			IN
CATV	RF		TO TV
	CHANNEL
	3	4
75 ohm			OUT
coaxial cable	AC IN
				(supplied)

NOTE TO CATV SYSTEM INSTALLER (USA only): This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practicable.

12