Fisher FVH-E439 Initial Setup, Channel Selection Convenience, Manual Erase, Manual Programming

SU4/UF2 (FVH-E439 GB) Tue. Feb. 09/1999

INITIAL SETUP

Channel Selection Convenience

You can select a channel on your VCR by using one of the two methods shown below:

10-KEY RANDOM ACCESS TUNING

Select the desired channel number by using the number buttons and 100/ENTER button on the remote control. For single-digit numbers, press 0 first. For channel numbers higher than 99, press the 100/ENTER button first.

Manual Erase

You can eliminate unwanted channels or channels with weak or scrambled signals from the memorized channel sequence.

1Select the channel you want to erase.

2Press the CLEAR button for about 2 seconds. “Erase” is displayed on-screen for about 3 seconds. The channel is now erased from the memory.

UP/DOWN SELECTION Manual Programming

BASIC OPERATION

Press and hold the CH/TRACK down (l) or up (j) (or CHANNEL on the front panel) button until the desired channel is received.

NOTE: When an inactive TV channel is selected on the VCR, the “No Signal” message appears and the sound is muted.

You can add channels to the memorized channel sequence by manually adding them to the tuner memory.

1Select the channel you want to add using the number buttons on the remote control.

2Press the SET button for about 2 seconds.

“Add” is displayed on-screen for about 3 seconds.

The channel is now added to the memory.

16