Introduction, Safety Characteristics | Fluke 43B guide

Chapter 3

Specifications

Introduction

Safety Characteristics

The Fluke 43B has been designed and tested in accordance with the following standards: ANSI/ISA S82.01-1994, EN/IEC 61010-1 (1993), CAN/CSA-C22.2 No.1010.1-92 (including approval), UL3111-1 (including approval) Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use.

This manual contains information and warnings that must be followed by the user to ensure safe operation and to keep the instrument in a safe condition. Use of this equipment in a manner not specified by the manufacturer may impair protection provided by the equipment.

Performance Characteristics

FLUKE guarantees the properties expressed in numerical values with the stated tolerance. Specified non-tolerance numerical values indicate those that could be nominally expected from the mean of a range of identical ScopeMeter test tools.

Environmental Data

The environmental data mentioned in this manual are based on the results of the manufacturer’s verification procedures.

35

Image 39

Fluke 43B user manual Introduction, Safety Characteristics, Performance Characteristics, Environmental Data

Contents

Fluke 43B Placing Orders and Getting Assistance Table of Contents Index Unpacking Carrying Case Contents Safety Information Read First Safety Information Read First Current Probe Fault protection. This is denoted by the symbol Powering the Fluke 43B Powering the Fluke 43B Opening Screen Measurement Connections Inputs Main Menu Introducing the Fluke 43B Main Menu Power Volts / Amps / HertzHarmonics Sags & Swells TransientsInrush Current Time resolution in Sags & Swells and Record modes Screen with 16 minutes time scale Setting the Date Instrument Setup Setting the Time Adjusting the Contrast Selecting Probes Move to the probe settings for input Setting up the Harmonic- and Power Function Power settings Harmonics- and Power Settings Harmonics settings Selecting a Language Connecting a Computer Using FlukeView Software Connecting a Parallel Printer Using a Printer Selecting a Printer Type Resetting the Fluke 43B Resetting the Fluke 43B Fluke 43B Storing the Fluke 43B Cleaning and StorageCleaning the Fluke 43B Cleaning the Current Probe Charging the Batteries Batteries Extending Battery Operation Time Replacing the Ni-Cd Battery Pack Replacing the Battery Pack Ordering Codes Replaceable PartsOrdering Code FlukeView User Information Ordering Code ManualsItem Cont’d Ordering Code Fluke 43B Ordering Code Applications Guide Troubleshooting Environmental Data Safety CharacteristicsPerformance Characteristics Introduction Maximum input voltage Input 1 Safety Specifications Harmonics Function SpecificationsPower Volts / Amps / Hertz Sags & Swells TransientsInrush Current Input Impedance HorizontalVertical DC, a DC Scope readings Continuity TemperatureOhm Diode Mechanical MiscellaneousDisplay Memory Altitude Electrical SpecificationsCurrent Probe 80i-500S Accuracy Environmental Conditions HumidityElectromagnetic Compatibility EMC Disturbance with test leads TL24 in scope mode Electromagnetic ImmunityDisturbance with test leads TL24 or Current Clamp 80i-500s Sample tests Declaration of ConformityManufacturer Statement of Conformity Limited Warranty & Limitation of Liability Index Save Key. See Applications Man Ual