Fluke Series II user manual OneTouch Series, Users Manual, Meaning, 1. Device Icons Operations

OneTouch Series II

Users Manual

Icon

Meaning

Network

Assistant

Station Filter

Stations

NetWare

NetBIOS

Table 2-1. Device Icons

Operations

Press to display the MAC address and software/hardware versions for your instrument.

Press to filter out station types of low or no interest to you (Figure 2-2). You can unselect the following: MAC Only (no L3 Address), IP Address, IPX, DECNET, and APPLETALK

Press to display a list of stations on the network (Figure 2-3). Stations are listed by name by default. You can also sort other ways (Frame Count, Protocol, Device Type, and MAC address) by pressing (Station List Sort). For more details, see "Tracking Addresses" and "Local versus Remote Stations" in Chapter 3. Press a line in the station list to see a Station Detail display (Figure 2-6). For more information, read "Station Detail Display."

Press to display a list of NetWare servers (Figure 2-5). Read “NetWare Devices List” for more information. If there are more devices than will fit on the display, you can scroll through the list.

Press to display a scrollable list of all NetBIOS servers with their network addresses and protocols detected on the segment (Figure 2-4).

2-4