Fluke Series II Results Displayed During the Throughput Test, Final Test Results, 7-13, Frm Len

ITO – Internetwork Throughput Option

Introduction 7

6.

Frm Len

7.

Run Test

100 Mb

Frame Size Max Bps

6432.8Mbps

128 65.5Mbps

256 75.8Mbps

512 86.0Mbps

768 86.0Mbps

1024 90.1Mbps

1280 92.2Mbps

1518 85.0Mbps

Select from the following RFC 1242 frame sizes: 64, 128, 256, 512, 768, 1024, 1280, and 1518 bytes.

After entering the above parameters, press Run Test to start the test.

ace705s.bmp

Figure 7-7. ITO Results Shown During the Test

Results Displayed During the Throughput Test

While the Throughput Test is running, the display (Figure 7-7) shows the elapsed test time, current network utilization (the meter), and the test parameters that were selected on the Throughput Test configuration display. The needle indicator on the Utilization meter shows total network utilization, which includes both the generated traffic and any other traffic present on the network.

Final Test Results

When Throughput Test is complete, the Network Assistant displays the final results. Figure 7-8 shows an example of final Throughput Test results screen, which includes the following information:

7-13