Fluke Series II user manual Conducting a Ping Station Test, OneTouch Series, Users Manual

OneTouch Series II

Users Manual

Conducting a Ping Station Test

After you have configured the appropriate IP address, you can set the frame length from the by pressing or (Figure 6-5).

This sets the frame length of the ping packet between 64 and 1518 bytes. This is the total frame length.

Press (Begin Pinging) from the IP Ping or NetWare Ping display (Figure 6-7) to start the test.

Figure 6-7 shows a sample IP Ping test results screen. Figure 6-8 shows an example of NetWare ping test results.

6-4