|
|
|
Accelerated packet forwarding and policy enforcement |
Table 1:
LED |
| State | Description |
|
|
|
|
5, 6, | Link | Green | The correct cable is inserted into this interface and the |
7, 8 | LED |
| connected equipment has power. |
|
| Flashing | Network activity at this interface. |
|
|
|
|
| Speed | Green | The interface is connected at 1000 Mbps. |
| LED |
|
|
| Amber | The interface is connected at 100 Mbps. | |
|
| ||
|
|
|
|
|
| Unlit | The interface is connected at 10 Mbps. |
|
|
|
|
Connectors
Table 2 lists and describes the FortiGate-5001FA2 connectors.
Table 2:
Connector | Type | Speed | Protocol | Description |
|
|
|
|
|
1 and 2 | LC SFP | Ethernet | Two accelerated gigabit SFP interfaces | |
|
|
|
| that can accept optical or copper gigabit |
|
|
|
| transceivers. These interfaces only |
|
|
|
| operate at 1000Mbps. The accelerated |
|
|
|
| interface connectors are inverted |
|
|
|
| compared to connectors 3 and 4. See |
|
|
|
| “Installing SFP transceivers” on |
|
|
|
| page 10 for more information. |
3 and 4 | LC SFP | Ethernet | Two gigabit SFP interfaces that can | |
|
|
|
| accept optical or copper gigabit |
|
|
|
| transceivers. These interfaces only |
|
|
|
| operate at 1000Mbps. See “Installing |
|
|
|
| SFP transceivers” on page 10 for more |
|
|
|
| information. |
5, 6, 7, 8 | 10/100/1000 | Ethernet | Copper gigabit connection to | |
|
|
| ||
CONSOLE | 9600 bps | Serial connection to the command line | ||
|
|
| serial | interface. |
USB | USB |
|
| FortiUSB key firmware updates and |
|
|
|
| configuration backup. |
Accelerated packet forwarding and policy enforcement
•Small packet applications, such as voice over IP (VoIP).
The
•Latency sensitive applications, such as multimedia.
The
| |
7 |