Fortress Technologies FS-50 manual Wiring 4-PIN Shock Sensor 22 Gauge wires

WIRING: 4-PIN Shock Sensor (22 Gauge wires)

SHOCK SENSOR: The sensor supplied with this system does not require any additional wiring. Simply mount the sensor in a suitable location, plug it in, and adjust the sensitivity. There are 2 LED’s on the shock sensor to assist you in adjusting sensitivity. The Green LED indicates the “Warn Away” level and the Red LED indicates a full alarm shock sensor violation.

Use the adjustment knob to set the sensitivity of the sensor. The adjustment knob adjusts both Pre-Warn and alarm trigger.

SHOCK SENSOR

GREEN LED (Pre-Warn)

Adjustment

(-) TRIGGER YELLOW

(-) PRE-WARN ORANGE

GROUND RED

12 VOLTS BLACK

RED LED (Trigger)

12