Foster S4000 For Multi-Purpose Products Option, Proceed to set the option, if necessary, Advice

EN 5/ DETERGENT PRODUCTS AND SETTING THE WATER SOFTENER

•FOR MULTI-PURPOSE PRODUCTS: OPTION

•Your appliance can be specially set to use multi-purpose if the water hardness is < 25°F or < 2,5 mmo/l.

Advice:

To provide better coverage of the wide range of multi-purpose products available, your dishwasher’s “4-in-1” option has two possible settings, accessible via the “Set” button.

“Extra Dry” improves the drying results in the event of reduced performance from the “2-in-1”,“3-in-1” or “4-in-1” types of multi-purpose product.

“Sparkling Clean” enables you to prioritise the sparkle of your crockery whatever the type of multi-purpose product used.

• Proceed as follows to adjust the water softener on the control panel:

— Access setting mode by holding down the “Set ” button until		Dirty
you hear a double audible signal (long beep).	DCS
— The screen displays “SEt” to indicate that you are in			Bio	Quick
Setting mode.					SET
					End

To use multi-purpose tablets, you must select setting H0 or

H I or H2, depending on the water hardness. To do this, keep on briefly pressing one or other of the keys until you reach the desired setting.

• Proceed to set the option, if necessary

(Light unlit) : deactivates the “4 en 1” option (Light flashing): corresponds to activation of the

“4 en 1” function with the setting for “Sparkling Clean”. This enables you to prioritise a brilliant finish for your crockery.

(Light permanently lit) : corresponds to activation of the “4 en 1” function with the setting for “Extra Dry”. “Extra dry” enhances the drying results if performance is reduced.

— The setting is validated automatically after 10 seconds if the “Set” button in not pressed again.

	Testing strip
	Hardness	0-10°F	10-18°F	18-25°F
		0-1mmol/l	1-1.8 mmol/l	1.8-2.5 mmol/l
HI	Function Deactivated	H0	H I	H2
SET	Multi-purpose products	H0	HI	H2
	“Sparkling Clean”
	Multi-purpose pro-	H0	HI	H2
	ducts “Extra Dry”

Important :

The multi-purpose products setting enables you to deactivate the rinsing and salt warning lights only on H0 and “4-in-1”.

• Loading multi-purpose tablets

To make loading the detergent easier, the distributor is located on the front of the upper basket; it is compatible with all the products recommended for your dishwasher.

•Place the tablet in the external compartment (Fig 04 on previous page) or

or, for optimum operation, pull out the distributor’s drawer and lay the tablet there. (Fig 05 on pre- vious page).

- Close the distributor.

39