Foster S4000 manual Presentation of the Control Panel

EN 2/ DESCRIPTION OF YOUR APPLIANCE

• PRESENTATION OF THE CONTROL PANEL

			Dirty
			DCS
	On/Off		Auto	Bio	Quick		Start / C
					SET
					End
Fig. 02	A	B	C		D	E	F

AOn/ Off :

Press this button to start your dishwasher : the screen lights up.

BDCS : “Dirt Control System”

This exclusive concept gives a direct access to 3 types of dishes only, but offers a large choice of programs by adjustment of your dirty mark level estimation. (See 10 / Washing

EDelayed programme start

Press this button to delay the programme by 1 to 12 hours.

FStart / C : Briefly press this button to start your programme.

If you make an error, to cancel a selection or cancel a programme while it is running, hold down this button for 3 seconds.

programmes).

CChoosing a programme: briefly

press one button or the other in succession to select your programme.

The indicator lights :

Salt:

lit; indicates lack of regenerating salt.

Rinsing liquid:

lit; indicates lack of rinsing product.

DSet :

•Set the water softerner.

(See 5/ Detergent products and setting the water softener).

-Activate or deactivate use of “regenerating salt”, “rinsing product” or “4-in-1” (depending on the water softener setting on the next page).

• Setting the audible signal. (See 11/ Programming).

Advice :

washing product:

lit; indicates that your dishwasher is set to use “2, 3 4-in-1” pellets.

In progress

lit; indicates that your programme is running.

End :

lit; indicates that your programme has finished

A short audible signal (beep) confirm the button’s selection, except for the “On/Off” button.

(See 10/ Washing Programmes).

35