Foster S4000 manual Loading the regenerating salt Fig, Regenerating salt indicator

EN 6/ LOADING THE REGENERATING SALT

•Loading the regenerating salt (Fig. 06)

Important :

Only use special dishwasher regener- ating salt. Do not use table salt or any type of cooking salt: this could damage your appliance’s water softener.

AUnscrew and remove the stopper on the salt tank.

BFill the tank with regenerating salt spe- cially designed for dishwashers.

CUse the funnel supplied with your dis- hwasher. The first time, top up with water up to the rim of the tank.

•Regenerating salt indicator :

This illuminates when salt must be added. After the tank has been filled with regenerat- ing salt, the indicator light may remain lit until the salt has dissolved sufficiently, usually after one cycle (of if the tank has not been filled completely; for example, when first putting the machine into service using the sample).

This can be deactivated as indicated in the Fig. 06 paragraph “For multi-purpose products” set-

ting table.

Important :

If the salt overflows when filling the tank, to avoid oxidization of the tub it is advisable to remove the salt crystals or to run a Soaking programme.

A

SEL

B

EAU

C

40