2.4 Powering the IFL
2.4Powering the IFL
•Transmitter power requirement: +14 VDC @ 200 mA
•Receiver power requirement: +14 VDC @ 250 mA.
•The Standalone Transmitter/Receiver is powered by a Foxcom supplied external DC power supply.
•The Rackmount Transmitters/Receivers are plugged into the rackmount chassis. The chassis can accept and power up to eight units.
Note At temperatures below10°C, the Transmitter’s internal heater will require an additional 100 mA. The Transmitter’s total power requirement will then be 300 mA.
Caution Ensure that there is a good airflow around the chassis rackmount.
7870 Interfacility Link Installation and User’s Guide | page 11 |
Foxcom proprietary information |
|
