Appendix 1.2 Cleaning Procedure for FC/APC Bulkhead Ports
Appendix 1.2 Cleaning Procedure for FC/APC Bulkhead Ports
Caution Clean the transmitter and receiver optical ports only when there is evidence of contamination or reduced performance.
Appendix 1.2.1 Swab Method
Using a clean fiber optic cleaning swab, gently wipe out the optical port. Discard the swab after use.
Figure 21 Cleaning the Optical Port
Figure 22 Cleaning the Optical Port [2]
Appendix 1.2.2 Compressed Air Method
Using the extension tube of the compressed air, blow into the port to remove any dust or debris. Do not allow the tube to touch the bottom of the port. Do not use commercial compressed air due to potential oil contamination.
Note To prevent contamination, the optical ports should be connected or covered with a dust cap at all times.
Use dry air or nitrogen only.
7870 Interfacility Link Installation and User’s Guide | page 29 |
Foxcom proprietary information |
|
