Replacing the Battery

This organizer uses 1 CR2032, 3-volt lithium bat- tery. Before you follow these steps you should have a small Phillips screwdriver (one that fits into screws with and “x” notch) and the new battery at hand.

Warning! When no batteries are installed, this organizer will save your information for only about 30 seconds. So quickly install the new battery once you remove the old one.

1.Turn the organizer off and turn it over.

2.Use a Phillips screwdriver to remove the screw on the battery cover and then remove the cover.

3.Remove the old battery and insert the new one with the positive (+) side facing up.

4.Replace the battery cover.

Warning! If RESET? appears when you next turn on the organizer, do not tap ENTER unless you want to reset the organizer and erase all your entered information. Tap any other key instead.

33

Page 33
Image 33
Franklin RT-8015 manual Replacing the Battery