WARNING

ELECTRIC SHOCK HAZARD

Turn off electric power before service or installation.

Extreme care must be used, if it becomes necessary to work on equipment with power applied.

Failure to do so could result in serious injury or death.

WARNING

HIGH PRESSURE HAZARD

Sealed Refrigeration System contains refrigerant and oil under high pressure.

Proper safety procedures must be followed, and proper protective clothing must be worn when working with refrigerants.

Failure to follow these procedures could result in serious injury or death.

Undercharged Refrigerant Systems

A check of the amperage drawn by the compressor

 

An undercharged system will result in poor performance

motor should show a lower reading. (Check the Unit

(low pressures, etc.) in both the heating and cooling

Specifi cation.) After the unit has run 10 to 15 minutes,

cycle.

check the gauge pressures. Gauges connected to system

Whenever you service a unit with an undercharge of

with an undercharge will have low head pressures and

substantially low suction pressures.

refrigerant, always suspect a leak. The leak must be

 

 

 

repaired before charging the unit.

 

 

 

 

 

 

To check for an undercharged system, turn the unit on,

 

 

 

allow the compressor to run long enough to establish

 

 

 

working pressures in the system (15 to 20 minutes).

 

 

 

During the cooling cycle you can listen carefully at the exit

 

 

 

of the metering device into the evaporator; an intermittent

 

 

 

hissing and gurgling sound indicates a low refrigerant

 

 

 

charge. Intermittent frosting and thawing of the evaporator

 

 

 

is another indication of a low charge, however, frosting

 

 

 

and thawing can also be caused by insuffi cient air over

 

 

 

the evaporator.

 

 

 

Checks for an undercharged system can be made at

 

 

 

 

 

 

the compressor. If the compressor seems quieter than

 

 

 

normal, it is an indication of a low refrigerant charge.

 

 

 

Overcharged Refrigerant Systems

of the evaporator will not be encountered because the

 

refrigerant will boil later if at all. Gauges connected to

Compressor amps will be near normal or higher.

system will usually have higher head pressure (depending

Noncondensables can also cause these symptoms. To

upon amount of over charge). Suction pressure should be

confi rm, remove some of the charge, if conditions improve,

slightly higher.

system may be overcharged. If conditions don’t improve,

 

 

 

Noncondensables are indicated.

 

 

 

Whenever an overcharged system is indicated, always

 

 

 

make sure that the problem is not caused by air fl ow

 

 

 

problems. Improper air fl ow over the evaporator coil may

 

 

 

indicate some of the same symptoms as an over charged

 

 

 

system.

 

 

 

An overcharge can cause the compressor to fail, since it

 

 

 

would be “slugged” with liquid refrigerant.

 

 

 

The charge for any system is critical. When the compressor

 

 

 

is noisy, suspect an overcharge, when you are sure that

 

 

 

the air quantity over the evaporator coil is correct. Icing

 

 

 

 

 

 

 

21

Page 21 Page 23
Page 22
Image 22
Friedrich XQ05M10, EQ08M11, XQ06M10, XQ10M10, XQ08M10 Undercharged Refrigerant Systems, Overcharged Refrigerant Systems
Page 21 Page 23

XQ08M10, XQ10M10, XQ05M10, XQ06M10, EQ08M11 specifications

Friedrich offers a range of innovative air conditioning units designed to provide superior comfort and energy efficiency. Among its lineup, the XQ06M10, EQ08M11, XQ05M10, XQ08M10, and XQ10M10 models stand out due to their advanced technologies and user-friendly features.

The XQ series, with models like XQ06M10 and XQ05M10, is renowned for its sleek design and exceptional performance in cooling and heating environments. These models utilize a highly efficient compressor system that reduces energy consumption while maintaining optimal temperature control. The XQ06M10, for example, is designed for medium-sized rooms, featuring a cooling capacity that caters well to residential and small office settings.

On the other hand, the EQ08M11 model is known for its enhanced energy efficiency compared to traditional units, thanks to its inverter technology. This feature allows the compressor to adjust its speed according to the cooling demand, resulting in lower energy costs and a quieter operation. The EQ08M11 is also equipped with a multi-stage filtration system, improving indoor air quality by capturing dust, allergens, and pollutants.

The XQ08M10 and XQ10M10 cater to larger spaces, with their respective higher cooling capacities making them suitable for bigger living areas or small commercial settings. Both models boast an easy-to-use digital control panel, which requires minimal effort to adjust settings. Additionally, they include a programmable timer feature, allowing users to automate operation according to their daily schedules, further enhancing energy savings.

All these models showcase Friedrich’s commitment to durability and reliability, built with high-grade materials designed to withstand varying temperatures and humidity levels. The XQ series is compact, facilitating easy installation without compromising performance.

In summary, the Friedrich XQ06M10, EQ08M11, XQ05M10, XQ08M10, and XQ10M10 models combine cutting-edge technology with practicality, ensuring an efficient and enjoyable indoor climate. With features aimed at energy efficiency, ease of use, and effective air filtration, these units represent a smart investment for anyone looking to enhance their living or working environment.
Top Page Image Contents