ELECTRICAL DATA
WARNING
ELECTRIC SHOCK HAZARD
Turn off electric power before service or installation.
All electrical connections and wiring MUST be installed by a qualifi ed electrician and conform to the National Electrical Code and all local codes which have jurisdiction.
Failure to do so can result in personal injury or death.
| NOTICE |
|
|
|
|
| FIRE HAZARD |
|
| Not following the above WARNING could result in fi re or |
|
| electically unsafe conditions which could cause moderate |
|
| or serious property damage. |
|
| Read, understand and follow the above warning. |
|
|
|
|
Wire Size | Use ONLY wiring size recommended for single outlet branch circuit. | |
Fuse/Circuit Breaker | Use ONLY the correct HACR type and size fuse/circuit breaker. Read electrical ratings on unit’s | |
| rating plate. Proper circuit protection is the responsibiity of the homeowner. | |
Grounding | Unit MUST be grounded from branch circuit through service cord to unit, or through separate | |
| ground wire provided on permanently connected units. Be sure that branch circuit or general | |
| purpose outlet is grounded. | |
Receptacle | The fi eld supplied outlet must match plug on service cord and be within reach of service cord. | |
| Do NOT alter the service cord or plug. Do NOT use an extension cord. Refer to the table above | |
| for proper receptacle and fuse type. | |
The consumer - through the AHAM Room Air Conditioner Certifi cation Program - can be certain that the AHAM Certifi cation Seal accurately states the unit’s cooling and heating capacity rating, the amperes and the energy effi ciency ratio.
*HACR: Heating Air Conditioning and Refrigeration
7
