2.2 AIR HANDLING PARTS
2.2.1 AIR GUIDE AND TURBO FAN
1.Remove the front grille. (Refer to section 2.1.1)
2.Remove the cabinet. (Refer to section 2.1.2)
3.Remove the control box. (Refer to section 2.1.3)
4.Remove the 4 screws which fasten the brace.
5.Remove the brace.
6.Remove the 2 screws which fasten the air guide upper.
7.Remove the air guide upper.(See figure 4)
8.Remove the 2 screws which fasten the evaporator.
9.Move the evaporator forward pulling it upward slightly. (See Figure 5)
10.Pull the hook out of orifice by pushing the tabs and remove it. (See Figure 6)
11.Using pliers remove the clamp secures the turbo fan.
12.Remove the turbo fan.
13.Remove the 2 screws which fasten the air guide to the base pan.
14.Move the air guide backward, and pull out from the base pan.(Move the air guide lower carefully.)
15.
2.2.2 FAN
1.Remove the cabinet. (Refer to section 2.1.2)
2.Remove the brace (Refer to section 2.2.1)
3.Remove the 5 screws which fasten the condenser.
4.Move the condenser to the left carefully.
5.Remove the clamp which secures the fan.
6.Remove the fan. (See Figure 7)
7.
Figure 4
Figure 5
Figure 6
Figure 7
Ñ7Ñ