Frigidaire FGES3065PF manual Restoring Factory Default Setting, Adjusting Oven Temperature

OVEN CONTROLS

Restoring Factory Default Setting

Your appliance is programmed with default control settings. Over time, users may make changes to these settings. The following options have settings that can be modified and may have been changed since the appliance was new:

•12 or 24 hour display mode

•Continuous bake or 6 hour energy savings mode

•Silent or audible control

•Oven temperature display (°F or °C)

•Oven temperature adjustments (offsets)

•Stored recipes

•Cancel/continue cooking with meat probe option.

3.Press start to accept the temperature change and the display will return to the time of day. Press off to reject the change if necessary.

To adjust the oven temperature lower:

1.Press bake for 6 seconds. UPO 0 will appear in the display.

2.To decrease the temperature, use the number keys to enter the desired change (Example -30°F) 3 0. Then, press self clean. The temperature may be decreased as much as 35°F (19°C).

3.Press start to accept the temperature change and the display will return to the time of day. Press off to reject the change if necessary.

NOTE

If you choose to restore factory default settings, all of the above user preferences will be restored to their original settings (factory default). The oven temperature offset will reset, and any stored recipes will be cleared.

To restore oven control to factory default settings:

1.When the oven is in idle and no cooking function is in operation, press and hold the 7 key until the acceptance tone sounds (about 6 seconds)

2.Press start. The control is now reset to default settings.

Adjusting Oven Temperature

The temperature in the oven is pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual oven temperature to be more or less than what is displayed. Before adjusting, test a recipe by using a temperature setting higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

To adjust the oven temperature higher:

1.Press bake for 6 seconds. UPO 0 will appear in the display.

2.To increase the temperature, use the number keys to enter the desired change. For example, for 30°F, press 3 0. The temperature may be increased as much as 35°F (19°C).

NOTE

The oven temperature adjustments made with this feature will not change the self clean cycle temperature or the broil temperature.

The oven temperature adjustments are permanent and will stay in the unit memory unless you manually change it again or if all the controls are reset. Even a power outage will not reset these changes. Follow the same procedure again if you wish to change it to a different setting or use the “Restoring Factory Default Setting” instructions on this page to restore settings to their defaults.

37