Frymaster BK1814 operation manual a. Change the orifices b. Adjust the manifold pressure

Frymaster BK1814 Series Gas Fryers

Chapter 3: Installation

CE GAS CONVERSION INSTRUCTIONS

1.Between G20- and G25-type Natural Gas, adjust the gas pressure at the regulator. (Refer to the CE Standard Burner Manifold Gas Pressure Chart.) Do not change the orifice.

2.Between a 2nd family (G20 or G25) and a 3rd family gas (G30 Butane or G31 Propane):

a.Change the orifices.

b.Adjust the manifold pressure.

3.Affix the new label included with the conversion kit next to the existing rating plate stating that the gas type has been converted. Remove any references to the previously used gas from the existing rating plate.

Conversions can only be executed by qualified, factory-authorized personnel.

Pilot pressure adjustment	Pressure flow adjustment
(remove cover screw to	(remove cover screw to
access)	access)
	Regulator Vent
Pilot gas supply	ON/OFF
connection.
	Gas-Cock Knob

Typical non-CE gas valve for electronic-ignition equipped fryers.

3-8