Frymaster E4 manual Heating Element Assemblies and Associated Parts, Wire harnesses must, for wire

2.5.5.1 Heating Element Assemblies and Associated Parts cont.

ITEM PART #

1

826-2198

826-2201

826-2208

√826-2192

√ 826-2197 826-2210 826-2200 826-2205 826-2193 826-2199 826-2206 826-2194 826-2207 826-2204 826-2195 826-2202 826-2211 826-2196 826-2203 826-2209

√2 826-2212 807-4324

3816-0681

4816-0480

5816-0688

6809-1003

*809-0766

7230-0784

8809-0518

9910-2042

10230-0781

11230-4902

12230-4101

13809-0567

14810-1212

15230-4903

16230-4103 823-5627

17810-3030 810-3031

18220-1190

220-0464

220-1855

19220-0733

20810-1233

*Not illustrated.

√Recommended parts.

	COMPONENT
Element Kits – includes gaskets, grommets, tie wraps, screws and nuts.
200V	7.0 kW (also used for 220V 8.5 kW)
200V	8.5 kW
200V	11.0 kW
208V	7.0 kW
		The wire harnesses must
208V	8.5 kW
208V	11.0 kW	be replaced when
220V	7.0 kW (also used for 240V 8.5 kW)	replacing 22kW elements
220V	11.0 kW	on all fryers, except 440V
230V	7.0 kW
		and 480V, manufactured
230V	8.5 kW
		before March 2007. (See
230V	11.0 kW
240V	7.0 kW	Page 2-30 for wire
240V	11.0 kW	harnesses.)
400V	8.5kW
440V	7.0 kW
440V	8.5 kW
440V	11.0 kW
480V	7.0 kW
480V	8.5 kW
480V	11.0 kW
Probe, Temperature RE – includes tie wraps and grommet.
Probe, Temperature Fast Ready
Grommet, Probe
Plug, .375-inch Dome
Gasket, Element
Screw, 10-32 X ⅜-inch Hex Head SS
Nut, 10-32 Keps Hex Head SS
Bracket, Temperature Probe
Screw, 8-32 X ⅜-inch Slotted Hex Head
Clamp, Element (Short)
Clamp, Element (Long)
Support, Full-Vat Element Rear
Support, Full-Vat Element Front (use 823-5621 for 17kW Front Support)
Tie-Wrap, Metal
Pin, .125 X .5-inch Split
Support, Dual-Vat Element Rear Dual Vat
Support, Dual-Vat Element Front Dual Vat 14kW
Support, Dual-Vat Element Front Dual Vat 17kW
Spring, Element Lift Left
Spring, Element Lift Right
Bracket, Lower Spring Single Foot Print
Bracket, Lower Spring
Bracket, Lower Spring Fryer ½
Bracket, Lower Spring Mating
Handle, Element Lift

2-25