Frymaster H14, H17, H22 27

INTERNATIONAL KESSEL SERVICE

Problem		Probable Causes	Corrective Action
			If available, substitute a controller
			known to be working for the
Fryer heats until			suspect controller. If the substitute
Fryer heats until			controller functions correctly,
high-limit trips		Contactor or controller has failed.	order a new controller from FASC.
without heat		Contactor or controller has failed.	If substitution of the controller
without heat			If substitution of the controller
indicator ON.			does not resolve the problem, the
			most likely cause is a contactor
			failed in the closed position. Call
			FASC.
			The fact that the heat indicator is
			ON indicates that the controller is
			functioning properly and is calling
			for heat. The high-limit thermostat
			functions as a normally closed
Fryer stops heating			switch. If the thermostat fails, the
Fryer stops heating		The high-limit thermostat or	"switch" opens and power to the
with heat indicator		The high-limit thermostat or	"switch" opens and power to the
with heat indicator		contactor has failed.	elements is shut off. If the
	ON.	contactor has failed.	elements is shut off. If the
	ON.		contactor fails to close, no power is
			contactor fails to close, no power is
			supplied to the elements.
			Determining which component has
			failed is beyond the scope of
			operator troubleshooting. Call
			FASC.
6.2.2 Error Messages and Display Problems

Problem		Probable Causes	Corrective Action
			Verify that the drain valve is fully
			closed. The fryer will not function
Basket lift timer			if the drain valve is not fully
Basket lift timer		Open drain valve or problem with	closed. If the drain valve is fully
display shows		Open drain valve or problem with	closed. If the drain valve is fully
display shows		latching circuits	closed, the problem is within the
	.	latching circuits	closed, the problem is within the
	.		latching circuitry and is beyond the
			latching circuitry and is beyond the
			scope of operator trouble shooting.
			Call FASC.
			This in an indication of a
Basket lift timer		Frypot temperature is more than	malfunction in the temperature
		Frypot temperature is more than	control circuitry, including a
		410ºF (210ºC) or, in CE countries,	control circuitry, including a
display shows	.	410ºF (210ºC) or, in CE countries,	failure of the high-limit thermostat.
display shows	.	395ºF (202ºC).	failure of the high-limit thermostat.
		395ºF (202ºC).	Shut the fryer down immediately
			Shut the fryer down immediately
			and call FASC.