H20.5 SERIES ELECTRIC FRYERS
CHAPTER 3: OPERATING INSTRUCTIONS
3.2 Programming The Computer Magic III.5 (cont.)
4."" (Setpoint) will appear in the left display. This is for setting the cooking temperature. The temperature previously selected will be displayed in the right display. Enter new
temperature. Press the switch to lock in temperature setting. If you do not wish to change the setting, press the switch.
5."" (Select Product) will appear in the left display. Press the product button to be programmed.
6. will appear in the left display. The sensitivity number previously selected will be displayed in the right display. Enter the new desired sensitivity number, the range is 1 to 9. Enter "0" for no sensitivity. Press the switch to lock in the setting.
Sensitivity adjusts
7. will now appear in the left display. A previously entered
8. now appears in the left display. The previous shake time (if any) will appear in the right display. If a product requires shaking during the cooking process, set the shake time by pressing
the number of minutes to cook before shaking. Press the switch to lock in the time. If no shake time is required, press "0" and press the switch. Example: Total cook time 3:00 minutes, shake after cooking 1:00 minute.
At the end of 1:00 minute, a beeper will sound and the product button indicator will flash for three seconds.
9. will now appear in the left display. Set the time to hold the cooked product from 13 seconds to 60 minutes. Press the switch. If you do not wish to use the hold time, enter "0" and press the switch.
10. will appear in the left display. If you desire to program more products, return to Step 5. If no more programming is required, lock in program by pressing the switch.