Frymaster H50 manual 1-11

2.Remove the blower motor shield and separate the blower motor from the housing as shown in the illustration on the following page.

Remove these screws to remove the shield from the blower assembly.

Remove these nuts to separate the blower motor from the housing.

3.Wrap the motor with plastic wrap to prevent water from entering it. Spray degreaser or detergent on the blower wheel and the blower housing. Allow it to soak for five minutes. Rinse the wheel and housing with hot tap water, then dry with a clean cloth.

Wrap the motor and wires with plastic wrap or a plastic bag.

Blower Housing

Blower Wheel

4.Remove the plastic wrap from the blower motor assembly. Reassemble the blower motor assembly and blower housing. Reinstall the blower shield.

5.Reinstall the blower assembly in the fryer and reconnect the wiring disconnected in Step 1.

1-11