Frymaster HD21814150G, HD21814G, HD1814G Gas Conversion Procedures DANGER, Typical gas valve

FRYMASTER HD1814 SERIES GAS FRYERS

CHAPTER 3: INSTALLATION

3.3.2 Gas Conversion Procedures

DANGER

This appliance was configured at the factory for a specific type of gas. Converting from one gas type to another requires the installation of specific gas-conversion components.

Switching to a different type of gas without installing the proper conversion components may result in fire or explosion. NEVER ATTACH THIS APPLIANCE TO A GAS SUPPLY FOR WHICH IT IS NOT CONFIGURED!

Conversion of this appliance from one type of gas to another should only be performed by qualified, licensed, and authorized installation or service personnel, as defined in Section 1.6 of this manual.

Contact factory with the following information when performing conversions:

•Fryer Serial Number

•Fryer Model Number

•Gas Type

•Operating Altitude

Conversions can only be executed by qualified, factory-authorized personnel.

Pilot pressure adjustment	Pressure flow adjustment
(remove cover screw to access)	(remove cover screw to access)

Typical gas valve

Regulator Vent

Pilot gas supply connection. ON/OFF Gas-Cock Knob

3-6