Press 
to turn on the computer.
The display will read — LO — until both heaters are
within 15°F of setpoint
NOTE: A small LED will light in the display when either the heater plate or air heater is energized.
Heater Plate
R 
E d¡ y
Air Heater
When the HLZ is ready for operation, the display reads REdY (ready). Place product in the HLZ in accordance with the restaurant’s established procedures.
NOTE: To check the actual temperature of a heater, press the corresponding Temperature Switch once. To check the setpoint temperature of a heater, press the switch twice (an indicator will light when the setpoint is displayed).
2 2 0
Setpoint Temperature
Frymaster L.L.C., 8700 Line Avenue 71106, P.O. Box 51000, Shreveport, Louisiana
Printed in the United States | Service Hotline | Page 7 |
|
|
