FujiFilm 30i manual Loading the Batteries, Loading the SmartMedia, Compatible batteries

LOADING THE BATTERIES

LOADING THE SmartMedia™

Compatible batteries

AA-size Ni-MH batteries

Fujifilm HR-3UF: 2 (supplied with the camera or sold separately)

●! You should carry a spare set of batteries (sold separately) when taking pictures.

●! Do not use different types of batteries or old and new batteries together.

●! You cannot use lithium, manganese or nickel- cadmium (Ni-Cd) batteries.

01	03
02

SmartMedia™(sold separately)

■Only use 3.3V SmartMedia

MG-4S ( 4MB), MG-16SW ( 16MB, ID) MG-8S ( 8MB), MG-32SW ( 32MB, ID) MG-16S (16MB), MG-64SW ( 64MB, ID) MG-32S (32MB), MG-128SW (128MB, ID) MG-64S (64MB)

01	03
02	1

14

◆ Notes on Handling Alkaline Batteries ◆

Alkaline batteries should only be used in an emergency. Note the following when using alkaline batteries: iThe battery terminals should be wiped clean with a

clean, dry cloth.

iAlways switch the LCD monitor off (➡P.27) before using alkaline batteries. Alkaline batteries cannot be used in Macro mode, Movie mode or Digital zoom mode.

iThe available shots/time for battery operation are limited. The available shots/time for battery operation vary depending on the battery brand and the ambient temperature. At temperatures of +5°C (+40°F) and below, it may not be possible to take pictures or play back music.

iBecause you are using the FinePix30i with the LCD monitor switched off, the power cuts out without a remaining battery low warning being displayed.

1Slide the battery cover out and lift it open.

2Insert the batteries correctly as indicated by the polarity icons.

3Close the battery cover.

●! Do not apply excessive force to the battery cover. ●! Take care not to drop the batteries when you open

or close the battery cover.

●! See P.94-96 for notes on the batteries.

●! Image files cannot be recorded or erased if a write- protect sticker is affixed to the SmartMedia.

●! Operation of this camera is only guaranteed when it is used with FUJIFILM SmartMedia.

●! Some 3.3V SmartMedia are labelled as “3V” or “ID” cards.

●! See P.97-98 for notes on the SmartMedia.

A SmartMedia with ID is needed to use the music function.

Gold marking

1Check that the camera is switched off. Then hold the camera so that the battery cover faces upwards and slide the cover out to open it.

2Push the SmartMedia firmly into the SmartMedia slot as far as it will go.

3Close the battery cover.

●! If you open the battery cover while the camera is switched on, the camera automatically switches off to

protect the data on the SmartMedia.
●! The SmartMedia will not slide fully into the slot if it is
inserted facing the wrong way. Be careful not to apply	15
undue force to the SmartMedia.